ITEM 5-3
Brake Fluid Change
Change brake fluid as follows.
Drain existing fluid from brake system completely, fill system with
specified fluid and carry out air purge operation.
For air purging procedure, refer to Section 5.
ITEM 5-4
Brake Lever and Cable Inspection
Parking brake lever
Check tooth tip of each notch for damage or wear. If any damage
or wear is found, replace parking lever.
Check parking brake lever for proper operation and stroke, and
adjust it if necessary.
For checking and adjusting procedures, refer to of Section 5.
“a”: Parking brake lever stroke:
7-9 notches (With 20 kg or
44 lbs of pull pressure)
“a”
Parking brake cable
Inspect brake cable for damage and smooth movement.
Replace cable if it is in deteriorated condition.
CHASSIS AND BODY
ITEM 6-1
Clutch Pedal Free Travel Inspection (Cable type
only)
Check clutch pedal (1) for height and free travel “a” referring to Sec-
tion 7C.
Adjust or correct if necessary.
0B-12
MAINTENANCE AND LUBRICATION
Summary of Contents for RA410
