Suzuki RA410, Manual

Page: 338 / 761

8) Install pistons and connecting rods as previously outlined.
9) Install cylinder head assembly to cylinder block as previously
outlined.
10) Install camshaft, crankshaft timing sprocket, timing chain, tim-
ing chain cover, cylinder head cover, water pump, etc., as pre-
viously outlined.
11) Install oil pump strainer and oil pan as previously outlined.
12) Install clutch to flywheel (for M / T vehicle). For clutch installa-
tion, refer to Section 7C “CLUTCH” section.
13) Install transmission to engine assembly.
Refer to “Engine Assembly” in this section.
“1”: Camshaft pulley side
“2”: Distributor side
14) Install engine mountings and brackets as previously outlined.
15) Install engine assembly to vehicle as previously outlined.
ENGINE MECHANICAL 6A4-79