Suzuki RA410, Manual

Page: 425 / 761

ECM/PCM POWER SUPPLY SYSTEM
MAIN RELAY
INSPECTION
1) Disconnect negative cable at battery.
2) Remove main relay (1) from fuse/relay box (2).
2
1
3) Check resistance between each two terminals as in table below.
If check results are as specified, proceed to next operation
check. If not, replace.
A
D
B
C
C
B
A
D
4) Check that there is continuity between terminals “A” and “B”
when battery is connected to terminals “C” and “D”.
If malfunction is found, replace.
6E1-60 ENGINE AND EMISSION CONTROL SYSTEM
TERMINALS RESISTANCE
Between A and B
8
(Infinity)
Between C and D 56 – 146 at 20
_
C, 68
_
F