Suzuki RA410, Manual

Page: 182 / 761

8) Connect brake pipes (1) (right & left) to wheel cylinders (2) and
tighten brake pipe flare nuts (3) to specified torque.
Tightening Torque
(a): 16 N
·m (1.6 kg-m, 11.5 lb-ft)
3, (a)
2
1
9) Connect brake flexible hoses (2) to bracket on rear axle and
secure it with E-rings (1).
10) Install brake drums (right & left). For details, refer to Steps 1)
to 7) of BRAKE DRUM INSTALLATION in SECTION 5.
11) Fill reservoir with brake fluid and bleed brake system (For
bleeding operation, see SECTION 5 in this manual.)
2
1
12) Install wheel and tighten wheel nuts (1) to specified torque.
Tightening Torque
(a): 85 N
·m (8.5 kg-m, 61.5 lb-ft)
1, (a)
13) Upon completion of all jobs, depress brake pedal with about
30 kg (66 Ibs) load three to five times so as to obtain proper
drum-to-shoe clearance.
Adjust parking brake cable (for adjustment, see SECTION 5
in this manual.)
14) Install console box.
15) Lower hoist and bounce vehicle up and down several times to
stabilize suspension.
Be sure that vehicle is off hoist and in non loaded condition.
REAR SUSPENSION 3E-15