IGNITION SYSTEM
ITEM 2-1
Spark Plugs Replacement
Replace spark plugs with new ones referring to Section 6F1.
ITEM 2-2
Distributor Cap and Rotor Inspection
1) Remove air cleaner case.
2) Inspect distributor cap and rubber caps for cracks.
3) Inspect center electrode and terminals for wear.
4) Inspect rotor for cracks, and its electrode for wear.
5) Repair or replace as necessary any component which is found
to be in malcondition as described above.
NOTE:
Dust and stains found within distributor can be cleaned by
using a dry, soft cloth.
6) Install air cleaner case.
FUEL SYSTEM
ITEM 3-1
Air Cleaner Filter Inspection
1) Unclamp air cleaner case clamps.
2) Take cleaner filter out of air cleaner case.
3) Visually check that air cleaner filter is not excessively dirty, dam-
aged or oily.
4) Clean filter with compressed air from air outlet side of filter.
5) Install air cleaner filter into case referring to Section 6A4.
6) Clamp case securely.
Air Cleaner Filter Replacement
Replace air cleaner filter with new one according to procedure de-
scribed in Section 6A4.
MAINTENANCE AND LUBRICATION
0B-9
Summary of Contents for RA410
