Suzuki RA410, Manual

Page: 101 / 761

INSPECTION
Rack Plunger
Inspect rack plunger (1) for wear or damage.
Inspect rack plunger spring (2) for deterioration.
In either case, if found defective, replace.
1
2
Steering Pinion
Inspect pinion teeth surface for wear or damage.
Inspect oil seal (1) for damage.
Inspect gear case O-ring (2) for damage.
Replace any part found defective.
Steering Pinion Bearing
Check rotation condition of bearing and inspect for wear.
If found defective, replace.
Steering Rack
Inspect for deflection, teeth wear, or damage, back surface wear
or damage.
Limit of rack deflection: 0.40 mm (0.02 in)
If deflection exceeds limit, replace rack.
Do not use a wire brush when cleaning.
MANUAL RACK AND PINION 3B-9