Suzuki RA410, Manual

Page: 743 / 761

WARNING:
When placing a live air bag (inflator) module on bench or
other surface, always face the bag up, away from the sur-
face. As the live passenger air bag (inflator) module must
be placed with its bag (trim cover) facing up, place it on
the workbench with a slit (1) or use the workbench vise
(2) to hold it securely at its lower mounting bracket (3).
It is also prohibited to place anything on top of the trim
cover and stack air bag (inflator) modules.
This is necessary so that a free space is provided to allow
the air bag to expand in the unlikely event of accidental
deployment.
Otherwise, personal injury may result.
1. Slit on workbench
2. Workbench vise
3. Lower mounting bracket
2
3
1
LIVE (INACTIVATED) SEAT BELT PRETENSIONERS
Special care is necessary when handling and storing a live (inacti-
vated) seat belt pretensioners.
Also, when the seat belt pretensioners activate, gas is generated
and the seat belt (1) is retracted into the retractor assembly (2)
quickly.
Note, therefore, that if they activate accidentally, the seat belt pre-
tensioners and other object(s) around them may be thrown through
the air.
Never attempt to disassemble the seat belt pretensioners (re-
tractor assembly).
If any abnormality is found, be sure to replace it with new one as
an assembly.
When an abnormality is noted as existing in the live (inactivated)
seat belt pretensioner, be sure to activate it before discarding it.
When grease, cleaning agent oil, water, etc., got on the seat belt
pretensioners (retractor assembly), wipe it off immediately with
a dry cloth.
If seat belt pretensioner was dropped from a height of 30 cm (1
ft) or more, it should be replaced with a new one as an assembly.
WARNING:
Never attempt to measure the resistance of the seat belt
pretensioners. It is very dangerous as the electric cur-
rent from the tester may activate pretensioner.
10B-48 AIR BAG SYSTEM