Suzuki RA410, Manual

Page: 362 / 761

INSTALLATION
1) If parts have been removed from fuel tank, install them before
installing fuel tank to vehicle.
2) Raise fuel tank (1) with jack and connect connector of fuel pump
& gauge and clamp wire harness.
Install fuel tank to vehicle.
Tightening Torque
(a): 23 N·m (2.3 kg-m, 17.0 lb-ft)
2, (a)
1
3) Connect fuel filler hose (1) and breather hose (2) to filler neck
(3) as shown in figure and clamp them securely.
Tightening Torque
(a): 1.5 N·m (0.15 kg-m, 1.0 lb-ft)
(a)
(a)
4) Connect fuel hose (1), fuel return hose (1) and vapor hose (2)
to each pipe as shown in figure and clamp them securely.
CAUTION:
When connecting joint, clean outside surfaces of
pipe where joint is to be inserted, push joint into
pipe till joint lock clicks and check to ensure that
pipes are connected securely, or fuel leak may oc-
cur.
Never let the fuel hoses touch the ABS sensor har-
ness (if equipped).
3
2
1
5) Install fuel pipe cover (1).
1
6C-8 ENGINE FUEL