Suzuki RA410, Manual

Page: 37 / 761

ITEM 6-2
Tire and Wheel Disc Inspection
[Tire inspection]
1) Check tire for uneven or excessive wear, or damage. If defec-
tive, replace.
1. Wear indicator
2) Check inflating pressure of each tire and adjust pressure to
specification as necessary.
NOTE:
Tire inflation pressure should be checked when tires are
cool.
Specified tire inflation pressure should be found on tire
placard or in owner’s manual which came with vehicle.
[Wheel disc inspection]
Inspect each wheel disc for dents, distortion and cracks. A disc in
badly damaged condition must be replaced.
[Tire rotation]
Rotate tires referring to Section 3F.
Wheel Bearing Inspection
1) Check front wheel bearing for wear, damage, abnormal noise
or rattles. For details, refer to Section 3D.
2) Check rear wheel bearing for wear, damage abnormal noise or
rattle. For details, refer to Section 3E.
ITEM 6-3
Drive Shaft (Axle) Boot Inspection
Check drive shaft boots (wheel side and differential side) for leak-
age, detachment, tear or any other damage.
Replace boot as necessary.
MAINTENANCE AND LUBRICATION 0B-13