Suzuki RA410, Manual

Page: 592 / 761

AUTOMATIC TRANSMISSION 7B-65
1
2
2
1
3
2
4
3
5
1
2
1
3 4
6
7
5
8) After inspection, install cushion plates (1), separator plates (2)
and friction plates (3) in that order.
CAUTION:
Install retaining plate with its inner protrusion side fac-
ing down.
9) Attach bearing to rear internal gear hub assembly (1) and set
them in case.
10) Install cushion plates (1), separator plates (2) and friction
plates (3) as shown in left figure, and then retaining plate (4),
one-way clutch outer race (5), separator plate (6) and snap ring
(7) in that order.
11) Assemble rear planetary carrier, one-way clutch (1), one-way
clutch outer race and one-way clutch retaining plate and then
set them in case.
CAUTION:
Install them into case so that groove (2) side of one-
way clutch faces up.
Check that rear planetary carrier turns smoothly when
turned clockwise and locks when turned counter-
clockwise.
12) Install parking pawl (1), spring (2), spring collar (3) and shaft (4)
to case.
Install parking lock support (5).