Suzuki RA410, Manual

Page: 173 / 761

REAR SHOCK ABSORBER
REMOVAL
1) Hoist vehicle.
2) Support rear axle (1) using floor jack to prevent it from lowering.
3) Remove lower nut (2).
4) Remove upper bolt (3) and nut (4). Then remove shock absorb-
er (5).
INSTALLATION
1) Install shock absorber (5) referring to left figure.
Tighten nuts temporaliry at this step.
2) Remove floor jack from rear axle (1) and lower hoist.
3) Tighten nuts to specified torque.
Tightening Torque
(a): 63 N·m (6.3 kg-m, 46.0 lb-ft)
(b): 25 N·m (2.5 kg-m, 18.5 lb-ft)
Inside
4
3
4, (a)
1
2, (b)
5
COIL SPRING
REMOVAL
1) Hoist vehicle and remove rear wheel (s).
2) Support rear axle (1) using floor jack (2) to prevent it from lower-
ing.
3) Remove lateral rod right side bolt (1) and nut (2).
4) Detach lateral rod right side from vehicle body.
2
1
5) Remove brake flexible hose E-ring (1).
1
3E-6 REAR SUSPENSION