Suzuki RA410, Manual

Page: 614 / 761

INSPECTION
Clutch release bearing
Check clutch release bearing (1) for smooth rotation.
If abnormality is found, replace it.
CAUTION:
Do not wash release bearing. Washing may cause grease
leakage and consequential bearing damage.
1
Clutch release shaft
Check clutch release shaft (1) and its pin for deflection or damage.
If abnormality is found, replace it.
1
INSTALLATION
1) Drive in a new clutch release shaft No.1 bush (1) using special
tools and then apply grease to bush inside.
Special Tool
(A): 09943-77910
(B): 09923-46030
“A”: Grease 99000-25010
2) Install release shaft with return spring applied to it.
“A”
3) Apply grease to clutch release shaft No.2 bush (1) inside and
press-fit it using the same special tool as in removal.
Grease 99000-25010
Special Tool
(C): 09922-46010
(C)
1
4) Apply grease to shaft oil seal (1) and then install it till its upper
end flush with end face of transmission case using special tool.
“A”: Grease 99000-25010
Special Tool
(D): 09925-98221
(D)
1, “A”
7C-10 CLUTCH