Suzuki RA410, Manual

Page: 174 / 761

6) Remove shock absorber lower nut (1).
7) Detach shock absorber lower side from rear axle.
1
8) Lower rear axle (1) gradually as far down as where coil spring
(2) can be removed.
9) Remove coil spring.
CAUTION:
Be careful not to let rear axle down too much.
It may cause damage to brake flexible hose.
2
1
INSTALLATION
1) Install coil spring (1) with its small pitch end facing up and large
pitch end (with paint marking) down and make sure that spring
end contact to stepped part (2) of spring seat (3) as shown.
LARGE
SMALL Upper side
1
3
2
2) Install shock absorber (1) lower side to rear axle.
Tighten shock absorber lower nut (2) temporaliry at this step.
3) Remove floor jack from rear axle.
4) Install brake flexible hose E-ring.
1
2
5) Install lateral rod (1) right side to vehicle body, refer to figure for
proper installing direction of bolt (2).
Tighten nut (3) temporaliry at this step.
6) Remove floor jack from rear axle.
FORWARD
2
3
1
2
3
1
REAR SUSPENSION 3E-7