Suzuki RA410, Manual

Page: 591 / 761

7B-64 AUTOMATIC TRANSMISSION
5. Transmission case
4
3
3
5
6) Fit spring (1) into spring hole in first-reverse brake piston (2).
Then using special tools, push down spring retainer (3) and
install snap ring (4).
Special Tool
(A) : 09926-98320
(B) : 09941-84510
(C) : 09926-98370
CAUTION:
Use care not to deform spring retainer.
7) Inspect 1st reverse brake as follows.
Using thickness gauge (1), measure clearance between sep-
arator plate (2) and friction plate (3).
Clearance between separator plate and retaining plate
Standard: 0.8 – 1.0 mm (0.032 – 0.039 in)
Limit
: 1.2 mm (0.047 in)
If measured value is out of inspection value range, replace
retaining plate and if it exceeds limit value, replace dish plate,
friction plates and separator plates.
Blow air (1) into oil hole (2) to check brake piston for move-
ment.