Suzuki RA410, Manual

Page: 236 / 761

10) Install cap and tighten it to specified torque, then confirm the
length “A”.
Tightening Torque
(a): 14 N·m (1.4 kg-m, 10.5 lb-ft)
“A”: Less than 26 mm (1.02 in.)
“A”
(a)
INSPECTION AFTER ASSEMBLY (FOR RH STEERING VE-
HICLE)
1) Install radiator cap test with special tool to master cylinder port
(1).
Special Tool
(A): 09952-46010
2) Apply air and confirm that pressure is not applied.
(A)
1
3) Set master cylinder on vise and adjust “A” to be the following.
“A”: 50 mm (1.97 in.)
4) Apply air with radiator cap tester, and confirm that 50kPa pres-
sure is applied.
5) Perform same steps 1)–4) for port (2).
A
2
5-32 BRAKES