![background image](http://html1.mh-extra.com/html/hyundai/c2017-adu01/c2017-adu01_manual_2195600001.webp)
Vacuum Cleaner
1/4" Drill Bit
Deburring Tool
Drill Stop
Masking Tape
Note:
- Accessory Installation
Model Year
2015 ~
Basic Required Hand Tools
Difficulty
( B )
Instructional Symbols / Definitions
Part No.
C2017 ADU01
C2017 ADUP1
Difficulty stated above reflects the minimum level of expertise required to install
the accessory.
( A ) Customer ( B ) Dealer Technician ( C ) Master Technician
Rust Inhibitor (Primer)
HYUNDAI Genuine Accessories
Vehicle Model
Sonata
Accessory
Cargo Net
Clip Removal Tool
Electric Drill
Notes to the Installer:
1) Read the entire installation instructions prior to beginning the installation
of this accessory.
2) Make sure the vehicle is completely clean before the accessory is installed.
3) Ensure the vehicle is properly protected in the area(s) that the accessory is to
be installed.
4) To prevent vehicle damage, never place tools on top of painted surfaces, seats,
dash pad, console or floor carpet/mats.
5) Always wear appropriate safety gear to include gloves and safety glasses when required.
Notes to the Customer:
1) This vehicle's Cargo Net is equipped with upper bungee hook clips to aid in the retention of items placed in the
Cargo Net.
2) It is recommended that when not using the Cargo Net to carry items, that the hook clips remain unfastened.
See step 2 on page 6 for details.
3) Contained are detailed instructions for the use of the hook clips. After installation of the Cargo Net, please place the
installation instructions in the vehicle glove compartment for later use if needed.
Denotes safety equipment required to be
used such as a mask, safety glasses, gloves,
and hearing protection.
Safety Glasses
Hearing Protection
Mask
Gloves
Denotes instructional steps
necessary to complete the
process.
Denotes quality processes to be
checked prior to moving to the next
step.
Denotes cautions to be taken to avoid
physical injury or electronic component
damage.
Denotes warnings that may lead to
serious physical injury or vehicle
damage.
Denotes specific tools that are
necessary to complete the step.
Denotes cautions to be taken to avoid
vehicle and component damage.
FMVSS 110
Compliance
Information
Part Number:
C2017 ADU01
C2017 ADUP1
0.364 lbs
0.165 kg
(Gross
Weight)
All dealers must determine if
the weight they have added in
the form of all options or
accessories, when added to
the weight of all Port/Dealer
Installed options or
accessories, exceeds the
lesser of 1.5% of GVWR or 100
lbs. If the additional weight
does exceed the lesser of the
indicated thresholds, a “Load
Carrying Capacity Reduced”
label must be installed. A
black, fine-point, indelible
marker must be used to write
by hand onto the label, the
reduced carrying capacity in
kilograms or pounds, which is
the total weight of all added
options and accessories.
Load Label Part Number:
NP070 - 09003
Cargo Nets are constructed of elastic and netting. Please use caution to avoid entanglement.
Avoid eye injury. DO NOT overstretch the Cargo Net, ALWAYS keep your face and body out of the
Cargo Net's recoil path.
5INS131600HI
Revision Date
06/17/2014
Page 1 of 7