Suzuki RA410, Manual

Page: 295 / 761

8) Install timing chain tensioner link (3).
9) Pull out stopper from adjuster.
1. Pad
2. Timing chain
tensioner
3
1
2
10) Turn crankshaft clockwise by 2 revolutions and check that
match marks are aligned as shown in figure.
1. Match mark on camshaft
2. Match mark on cylinder head
3. Key
4. Timing mark on cylinder block
4
11) Install timing chain cover.
Refer to item “TIMING CHAIN COVER” in this section for
installation.
12) Install cylinder head cover.
Refer to item “CYLINDER HEAD COVER” in this section for
installation.
13) Install oil pan.
Refer to item “OIL PAN AND OIL PUMP STRAINER” in this
section for installation.
14) Check ignition timing and adjust as necessary, referring to
Section 6F1.
6A4-36 ENGINE MECHANICAL