Suzuki RA410, Manual

Page: 274 / 761

1. Intake manifold
2. Throttle body
3. Gasket
4. Fuel pressure regulator
5. Fuel delivery pipe
6. Fuel injector
7. Upper stiffener No.1
8. Upper stiffener No.2
9. MAP sensor
10. IAT sensor
11. PCV valve
12. Intake manifold nut
13. Stiffener bolt
14. EGR valve
15. EGR back pressure transducer
16. EGR solenoid vacuum valve
17. EVAP canister purge valve
(if equipped)
9
13 23 N·m (2.3 kg-m)
3
12 10 N·m (1.0 kg-m)
14
15
17
16
: Tightening Torque
: Do not reuse
REMOVAL
1) Relieve fuel pressure according to procedure described in p.
6-4.
2) Disconnect negative cable at battery.
3) Drain cooling system.
WARNING:
To help avoid danger of being burned, do not remove
drain plug and radiator cap while engine and radiator
are still hot. Scalding fluid and steam can be blown out
under pressure if plug and cap are taken off too soon.
1. Radiator
2. Drain plug
4) Remove air cleaner assembly, resonator and their hoses as
previously outlined.
5) Disconnect accelerator cable (1).
1
ENGINE MECHANICAL 6A4-15
THROTTLE BODY AND INTAKE MANIFOLD