Suzuki RA410, Manual

Page: 172 / 761

ON-VEHICLE SERVICE
LATERAL ROD
REMOVAL
1) Hoist vehicle.
2) Remove lateral rod nuts (1) and bolt (2).
3) Remove lateral rod (3).
2
1
3
1
INSTALLATION
1) Install lateral rod (1) to rear axle (2) and vehicle body (3) refer-
ring to figure for proper installing direction of nuts, (4), bolt (5)
and washer (6).
Tighten nuts temporaliry at this step.
5
3
4
1
6
2
FORWARD
1
Rear axle side Body side
2) Lower hoist.
3) Tighten lateral rod nuts (1) to specified torque. It is the most de-
sirable to have vehicle off hoist and in nonloaded condition
when tightening them.
Tightening Torque
(a): 50 N·m (5.0 kg-m, 36.5 lb-ft)
(b): 65 N·m (6.5 kg-m, 47.0 lb-ft)
1, (b)
1, (a)
REAR SUSPENSION 3E-5