7B-24
AUTOMATIC TRANSMISSION
1. Lower case
2. Drain plug
ON VEHICLE SERVICE
MAINTENANCE SERVICE
CHANGING FLUID
1) Raise vehicle.
2) With transmission cool, remove drain plug and drain fluid.
3) Install drain plug gasket and drain plug to oil pan, and tighten
drain plug to specification.
Tightening Torque
(a): 40 N
.
m (4.0 kg-m, 29 lb-ft)
4) Remove fluid level gauge from fluid filler tube, and add new fluid
from fluid filler tube. Use DEXRON -
II
E or equivalent automatic
transmission fluid.
NOTE:
Draining or refilling volume of fluid may change depending
on draining time or temperature etc.
5) Check fluid level with transmission at room temperature and at
normal operating temperature as outlined in the following item.
(Refer to “Fluid Level” in this section.)
A/T fluid specification
An equivalent of DEXRON -
II
E
Fluid capacity
Total 4.1 liters
Summary of Contents for RA410
