Suzuki RA410, Manual

Page: 744 / 761

WARNING:
For handling and storage of a live seat belt pretension-
er, select a place where the ambient temperature be-
low 65
C (150 F), without high humidity and away from
electric noise.
Never carry the seat belt pretensioner by the wire or
connector of the pretensioner.
When placing a live seat belt pretensioner on the work-
bench or other surface, be sure not to lay it with its ex-
haust hole (1) provided side facing down. It is also
prohibited to put something on its face with an ex-
haust hole (1) or to put a seat belt pretensioner on top
of another.
Otherwise, personal injury may result.
1
DEPLOYED AIR BAG (INFLATOR) MODULES AND ACTI-
VATED SEAT BELT PRETENSIONERS
WARNING:
The air bag (inflator) module and seat belt pretension-
er immediately after deployment/activation is very hot.
Wait for at least 30 minutes to cool it off before pro-
ceeding the work.
Do not apply water, oil, etc. to deployed air bag (infla-
tor) module and to activate seat belt pretensioner.
After an air bag (inflator) module has been deployed,
the surface of the air bag may contain a powdery resi-
due. This powder consists primarily of cornstarch
(used to lubricate the bag as it inflates) and byprod-
ucts of the chemical reaction. As with many service
procedures, gloves and safety glasses should be
worn.
Wash your hands with mild soap and water after com-
pleting the work.
Refer to the procedure described under DEPLOYED AIR BAG (IN-
FLATOR) MODULE AND ACTIVATED SEAT BELT PRETEN-
SIONER DISPOSAL in this section.
AIR BAG SYSTEM 10B-49