Suzuki RA410, Manual

Page: 183 / 761

16) Tighten center and rear trailing arm nuts (1), shock absorber
lower nuts (2) and lateral rod left side nut (3) to specified torque
(right and left).
Tightening Torque
(a): 80 N·m (8.0 kg-m, 58.0 lb-ft)
(b): 25 N·m (2.5 kg-m, 18.5 lb-ft)
(c): 50 N·m (5.0 kg-m, 36.5 lb-ft)
17) Check to ensure that brake drum is free from dragging and
proper braking is obtained.
18) Perform brake test (foot brake and parking brake).
2, (b)
1, (a)
3, (c)
WHEEL BEARING AND WHEEL STUD
REMOVAL
1) Remove rear brake drum. For details, refer to REAR BRAKE
DRUM REMOVAL in SECTION 5.
2) Remove bearing circlip (1) using special tool.
Special Tool
(A): 09900-06108
(A)
3) Remove wheel bearing using special tool and hydraulic press
(1).
Special Tool
(A): 09951-76010
(A)
(1)
3E-16 REAR SUSPENSION