Suzuki RA410, Manual

Page: 655 / 761

4) Remove door trim (1) with inside weatherstrip.
With inside handle bezel (2) tilted as shown in figure, turn door
trim (1) 90
clockwise to remove it. And disconnect power win-
dow switch lead wire (if equipped).
2
1
5) Remove door inside pull handle bracket (1).
6) Remove door sealing cover.
1
7) Remove outer weatherstrip (1).
1
CAUTION:
Using a tape-wrapped putty knife (or tape-wrapped
screwdriver), pry off weatherstrip. Use of an un-
wrapped tool will cause damage to painting.
8) Detach rear part of glass run (1) from sash (2) and remove sash
(2) by removing three screws (3).
9) Remove rear door glass.
3
1
2
3
INSTALLATION
Reverse removal procedure to install door glass noting the follow-
ing points:
Glass fitted position of bottom channel (1) is as shown in figure.
324.5 mm (12.8 in.)
1
BODY SERVICE 9-13