manualshive.com logo in svg

Honda 2000 Accord Sedan, Online Reference Owner'S Manual

The Honda 2000 Accord Sedan is a reliable and stylish vehicle that offers a smooth driving experience. With our Online Reference Owner's Manual, you can easily access all the information you need about your Accord Sedan. Download the manual for free from our website manualshive.com and maximize your ownership experience.

Share
Download
background image

2000 Accord Sedan Online Reference Owner's Manual 

Use these links (and links throughout this manual) to navigate through this reference. 
For a printed owner's manual, click on authorized manuals or go to www.helminc.com. 

 

Contents

 

 

Introduction 

.........................................................................................................................................

 

i 

A Few Words About Safety

.................................................................................................................

ii 

Your Vehicle at a Glance

.....................................................................................................................

2 

Driver and Passenger Safety 

..............................................................................................................

5 

Proper use and care of your vehicle's seat belts, and Supplemental Restraint System. 

Instruments and Controls

.................................................................................................................

49

Instrument panel indicator and gauge, and how to use dashboard and steering column controls. 

Comfort and Convenience Features 

..............................................................................................

105

How to operate the climate control system, the audio system, and other convenience features. 

Before Driving

..................................................................................................................................

155

What gasoline to use, how to break-in your new vehicle, and how to load luggage and other cargo. 

Driving 

..............................................................................................................................................

169

The proper way to start the engine, shift the transmission, and park, plus towing a trailer. 

Maintenance

.....................................................................................................................................

193

The Maintenance Schedule shows you when you need to take your vehicle to the dealer. 

Appearance Care

..............................................................................................................................

261

Tips on cleaning and protecting your vehicle. Things to look for if your vehicle ever needs body repairs. 

Taking Care of the Unexpected

......................................................................................................

269

This section covers several problems motorists sometimes experience, and how to handle them. 

Technical Information

.....................................................................................................................

295

ID numbers, dimensions, capacities, and technical information. 

Warranty and Customer Relations (U.S. and Canada)

................................................................

309

A summary of the warranties covering your new Acura, and how to contact us. 

Authorized Manuals (U.S. only)

......................................................................................................

315

How to order manuals and other technical literature. 

Index

......................................................................................................................................................

 

I  

Service Information Summary 

A summary of information you need when you pull up to the fuel pump. 

 

Owner's Identification Form

Summary of Contents for 2000 Accord Sedan

































































































































































































































































































































Reviews:

No comments

Related manuals for 2000 Accord Sedan

Triumph MAYFLOWER 1951 Instruction Book preview
MAYFLOWER 1951
Brand: Triumph Pages: 86
Alpine eX-10 Owner'S Manual preview
eX-10
Brand: Alpine Pages: 69
Allen Sports S302 Instructions preview
S302
Brand: Allen Sports Pages: 2
Bestop 54822 Installation Instructions Manual preview
54822
Brand: Bestop Pages: 11
Whispbar K455W Fitting Instructions Manual preview
K455W
Brand: Whispbar Pages: 14
Vauxhall 2014 Insignia VXR SuperSport Specifications preview
2014 Insignia VXR SuperSport
Brand: Vauxhall Pages: 56
Pacbrake C44059 Installation Manual preview
C44059
Brand: Pacbrake Pages: 14
Subaru 2005 Baja Owner'S Manual preview
2005 Baja
Brand: Subaru Pages: 34
Compass 02106 Manual preview
02106
Brand: Compass Pages: 16
John Gold Gold Cruuse Cruisecontrol GC90 Installation Manual preview
Gold Cruuse Cruisecontrol GC90
Brand: John Gold Pages: 24
Whispbar K498W Fitting Instructions Manual preview
K498W
Brand: Whispbar Pages: 14
Chariot Carriers 51100913 Instruction Manual preview
51100913
Brand: Chariot Carriers Pages: 3
Raptor Series MAGNUM RT Series Manual preview
MAGNUM RT Series
Brand: Raptor Series Pages: 6
hc-cargo 171850 Mounting And Operation Instructions preview
171850
Brand: hc-cargo Pages: 60
Honda Pilot 2019 Owner'S Manual preview
Pilot 2019
Brand: Honda Pages: 85
Mazda 2006 RX-8 Service Highlights preview
2006 RX-8
Brand: Mazda Pages: 122
Lit Lightz RGBW Rock Lights Setup Manual preview
RGBW Rock Lights
Brand: Lit Lightz Pages: 3
GARO Wallbox GLB Quick Start Manual preview
Wallbox GLB
Brand: GARO Pages: 15

Brands by name

Popular brands

Load more brands