Suzuki RA410, Manual

Page: 124 / 761

INSPECTION OF P/S CONTROL MODULE
CIRCUITS
P/S control module (1) and its circuits can be checked at P/S con-
trol module wiring couplers (2) by measuring voltage and resis-
tance.
CAUTION:
P/S control module cannot be checked by itself. It is
strictly prohibited to connect voltmeter or ohmmeter to
P/S control module with coupler disconnected from it.
Voltage Check
1) Remove steering column lower cover with ignition switch OFF
position.
2) Check voltage at each terminal with couplers (2) connected P/S
control module. Each voltage should be as specified in the fol-
lowing page.
NOTE:
As each terminal voltage is affected by the battery voltage,
confirm that it is 11V or more when ignition switch is ON.
1
2
2
2
TERMINAL ARRANGEMENT OF P/S CONTROL MODULE COUPLERS (VIEWED FROM HARNESS SIDE)
B4 B3
B2 B1
A1 A2
C1
C2
C3
C4
C5
A3
A4 A5
A6
A7
A8
ELECTRICAL POWER STEERING (P/S) SYSTEM 3B1-17