Suzuki RA410, Manual

Page: 745 / 761

AIR BAG WIRE HARNESS AND CONNECTORS
Air bag wire harness (1) can be identified easily as it is covered with
a yellow protection tube. Be very careful when handling it.
When an open in air bag wire harness (1), damaged wire har-
ness, connector or terminal is found, replace wire harness, con-
nectors and terminals as an assembly.
When installing it, be careful so that the air bag wire harness (1)
is not caught or does not interfere with other parts.
Make sure all air bag system grounding points (2) are clean and
grounds are securely fastened for optimum metal-to-metal con-
tact. Poor grounding can cause intermittent problems that are
difficult to diagnose.
1
2
DISPOSAL
Do not dispose of the live (undeployed) air bag (inflator) modules
and the live (inactivated) seat belt pretensioners. When disposal
is necessary, be sure to deploy/activate the air bag and seat belt
pretensioner according to deployment/activation procedure de-
scribed in AIR BAG (INFLATOR) MODULE AND SEAT BELT PRE-
TENSIONER DISPOSAL.
WARNING:
Failure to follow proper air bag (inflator) module and seat
belt pretensioner disposal procedures can result in air
bag deployment and pretensioner activation which
could cause personal injury. Undeployed air bag (infla-
tor) module and inactivated seat belt pretensioner must
not be disposed of through normal refuse channels.
The undeployed air bag (inflator) module and inactivated
seat belt pretensioner contain substances that can
cause severe illness or personal injury if the sealed con-
tainer is damaged during disposal.
10B-50 AIR BAG SYSTEM