Suzuki RA410, Manual

Page: 358 / 761

FUEL LINES
Due to the fact that fuel feed line is under high pressure, use special
care when servicing it.
INSPECTION
Visually inspect fuel lines for evidence of fuel leakage, hose crack
and deterioration, or damage.
Make sure all clamps are secure.
Replace parts as needed.
FUEL PIPE
REMOVAL
1) Relieve fuel pressure in fuel feed line according to procedure on
Section 6 p. 6-4.
2) Disconnect negative cable at battery.
3) Remove pipe cover (1) from vehicle.
4) Disconnect fuel pipe joint and fuel hose from fuel pipe at the
front and rear of each fuel pipe.
For quick joint (2), disconnect it as follows:
a) Remove mud, dust and/or foreign material between pipe (3)
and joint by blowing compressed air.
b) Unlock joint lock by inserting special tool between pipe and
joint.
Special Tool
(A): 09919-47020
c) Disconnect joint from pipe.
WARNING:
A small amount of fuel may be released after fuel hose
is disconnected. In order to reduce the chance of per-
sonal injury, cover hose and pipe to be disconnected
with a shop cloth.
Be sure to put that cloth in an approved container
when disconnection is completed.
1
2
3
6C-4 ENGINE FUEL