Maintenance Objects
555-233-119
926
Issue 5 October 2002
1004
ABORT
The port was seized by a user for a valid call. Use the display port
PCSSpp command to determine the trunk group/member number of the
port. Use the status trunk command to determine the service state of the
port. If the service state indicates that the port is in use, the port is
unavailable for certain tests. Wait until the port is idle before retesting.
1. If the port status is idle, retry the command at 1-minute intervals a
maximum of 5 times.
1005
ABORT
Test inapplicable to present configuration. This is a normal condition.
1018
ABORT
Test has been disabled via administration.
1. Verify that the
Maintenance Tests
field on the Trunk Group Form
is set to n. To enable the test, issue change trunk-group x command
where x equals the number of the trunk group to be tested. Set the
Maintenance Tests
field to y.
2000
ABORT
Response to the request was not received within the allowable time period.
1. Retry the command at 1-minute intervals a maximum of 5 times.
Table 162.
TEST #3 CO Demand Diagnostic Test —
Continued
Error
Code
Test
Result
Description/ Recommendation
Continued on next page