CARD-MEM (Memory Card)
Issue 5 October 2002
865
555-233-119
Table 136.
TEST #693 Memory Card Erase/Write/Read Test
Error
Code
Test
Result
Description/ Recommendation
1192
ABORT
Applications are accessing the memory card.
1. Wait 10 minutes for the applications to complete.
2. Retry the command at 1-minute intervals a maximum of 5 times.
2012
2106
2114
ABORT
Internal system error
1. Retry the command at 1-minute intervals a maximum of 5 times.
2013
2100
none
ABORT
Could not allocate the necessary system resources to run this test.
1. Retry the command at 1-minute intervals a maximum of 5 times.
2110
ABORT
No memory card is inserted.
1. Insert a formatted memory card into the slot at the Processor circuit pack.
2. Retry the command at 1-minute intervals a maximum of 5 times.
2111
ABORT
Inserted memory card cannot be recognized.
1. Insert a formatted memory card into the slot at the Processor circuit pack.
2. Retry the command at 1-minute intervals a maximum of 5 times.
2112
ABORT
Internal system error The inserted memory card is a "system-upgrade"
memory card.
1. Replace the inserted memory card with a user’s memory card.
2. Retry the command at 1-minute intervals a maximum of 5 times.
2115
ABORT
The memory card is write-protected.
1. Take the memory card out, and change the "write-protection" switch to
the "not-protected" position.
2. Retry the command at 1-minute intervals a maximum of 5 times.
2113
ABORT
The inserted memory card has only one directory file.
1. Use test card-mem to verify that the Memory Card Directory Recovery
Test (#699) passes.
If the directory file cannot be recovered, replace the memory card.
2. Retry the command at 1-minute intervals a maximum of 5 times.
2117
ABORT
No translation file has been saved onto the memory card.
1. Use save translation to verify that the translations are saved onto the
memory card successfully.
2. Retry the command at 1-minute intervals a maximum of 5 times.
Continued on next page