Maintenance Commands
555-233-119
506
Issue 5 October 2002
Page 2 displays the part ID of the station, if available.
Field descriptions
The following display shows the call’s audio is being IP Media Processor
ip-hairpinned through a TN2302 Prowler board on this switch.
If the station’s audio is connected ip-ip directly from the station to the far end
destination, the audio port shown on page 3 equals the station port shown on
page 1.
Part ID Number
Shows the Part ID Number (comcode) of the telephone. If this field
shows Unavailable, then the software was unable to determine the
Part ID Number.
Serial Number
This is the serial number of the telephone. This field may show
Unavailable if the software is unable to determine the Serial
Number.
This field can also show Errored if the serial number received is not
in the correct format.
Station Lock
Active
Indicates whether the station has been locked using Station Lock.
status station 1002
Page 2 of x
GENERAL STATUS
CONNECTED STATION INFORMATION
Part ID Number: 108576694
Serial Number: 01SP29123456
Station Lock Active? no