555-233-119
1208
Issue 5 October 2002
Aborting a firmware download
If you need to abort a scheduled (pending) firmware download:
1. Type disable firmware download and press
Enter
.
This command
■
Continues to download the firmware image file to circuit pack in
progress.
■
Aborts the remainder of the download schedule.
■
Clears the contents of the Status Firmware Download screen
(
Screen 82
).
Disable filesystem
NOTE:
Performing the following steps on the TN799DP (C-LAN) or TN2501AP
(VAL) circuit packs, removes only the ftplogin and the ftppassword. The
allocated memory for the file system remains reserved for the session.
To free up resources on the source circuit pack, you must delete the new firmware
image files and disable the filesystem.
1. Type remove file board <UUCSS> <filename> and press
Enter
to remove
image files from the source board.
2. Type list directory board <UUCSS> and press
Enter
.
The List Directory screen (
Screen 75
) appears.
3. Verify that the new firmware image file is not listed in the
File/Directory Name
field.
4. Type disable filesystem board <UUCSS> and press
Enter
to disable the
filesystem on the source circuit pack.
NOTE:
This command is only successful if no files remain on the source
circuit pack.
Troubleshooting firmware downloads
This section contains three troubleshooting sections:
■
‘‘Reset 1 or 2’’
■
‘‘Test firmware download’’
■
‘‘Backing out of a firmware download’’