Maintenance Commands
555-233-119
594
Issue 5 October 2002
test tdm
Use test tdm to test the time slots on a bus associated with a PPN or an EPN.
Action/
Object
Qualifier
Qualifier Description
Logins
Defaults
Feature
Interactions
test tdm
pn number
short
long
repeat
number
clear
schedule
nn = number of the port network to have
its TDM bus tested. Both halves (“a” and
“b”) of the TDM bus are tested.
Option for a brief series of
nondestructive diagnostic tests.
Option for a longer, more
comprehensive series of both
destructive and nondestructive
diagnostic tests.
How many times each test in the
sequence is repeated (1-100)
This option causes the test sequence
(short or long) to repeat until the alarm
(if any) is cleared or a single test in the
sequence fails.
1
Use the screen to schedule execution of
the command. The command is placed
in the command queue and is executed
at the specified time. The information
displayed by the command is sent to the
system printer instead of the screen.
2
Examples:
test tdm port-network 1 l
test tdm port-network 2 sh r 2
test tdm port-network 2 sh sch
test tdm port-network 1 l r 25
test tdm port-network 2
test tdm port-network 1 c
1
If no alarms are registered against the maintenance object then the test sequence is run only once. The long
clear option forces a clear of all alarms if no errors are encountered during testing. The short clear option only
clears alarms pertinent to tests in the short sequence.
2
See the Report Scheduler and System Printer feature specification for more details.
init
inads
craft
Test
Sequence
= short;
Repeat = 1
none