status tti
Issue 5 October 2002
523
555-233-119
Output
The following example shows the output for status tti and status psa.
Field descriptions
TTI
Background
Task State
generating TTI ports
removing TTI ports
suspended
not active
completed - all ports translated
:
The last background
maintenance task completed normally.
completed - some ports not translated
:
The last background
maintenance task stopped when resources were exhausted, and
some ports were not translated.
TTI State
off
= TTI is not enabled
voice
/data = the type of TTI ports being generated or removed
# of Boards
Completed
Number of TTI-supported circuit packs that were processed by the
background maintenance task.
The ports on a “completed” circuit pack:
■
if unadministered, were translated as TTI ports
■
if administered, the administration was removed
# of Boards
Left to Process
The number of TTI-supported circuit packs that were not processed
by the background maintenance task.
Percent
Complete
A ratio of the of number of circuit packs completed to the total number
of circuit packs.
Elapsed Time
Since Task
Started
Elapsed time in hours:minutes:seconds since the TTI background
task was started.
If the task is completed or suspended, this field shows the elapsed
time up to when the job finished or was suspended.
blank = the task is not active.
status tti
Page 1 of 1
status psa
TTI/PSA STATUS
TTI Background Task State: generating tti ports
TTI State: voice
# of Boards Completed: 30
# of Boards Left to Process: 120
Percent Complete: 25
Elapsed Time since Task Started: 0:15
NOTE: TTI state must be ‘voice’, TTI task state ‘completed’ and PSA
customer-option enabled, for PSA to oerate properly