enable administered-connection
Issue 5 October 2002
267
555-233-119
enable administered-connection
Use enable administered-connection to restart scheduled and periodic
maintenance for a single or all administered connections, and to track the
maintenance processing of administered connections without interference from
other maintenance processing. This command also restarts the processing of
in-line errors for all or the selected administered connection.
enable filesystem board
enable filesystem board ppcss <size[actual size]> <login [ID]>
Use enable filesystem board to request the board to create a filesystem of a
certain size. If the optional size parameter is not given, the maximum available is
used. If more than 32K is not available an error message is given.
This command fails if the filesystem is already enabled.
Parameters
enable mst
Use enable mst to enable the message trace that is controlled according to the
parameters created with change mst. If enable mst is executed while the trace is
enabled, the command has no effect.
Action/Object
Qualifier
Qualifier Description
Logins
Defaults
Feature
Interactions
enable
administered
- connection
ac number
all
The number of the administered
connection
All administered connections are
enabled.
Examples:
enable administered-connection 128
enable administered-connection all
init
inads
craft
cust
rcust
mis
none
none
size
The size of memory allocated is 1KB to 1024 KB. An error message, not
enough memory available on source board, appears on the SAT if the
source board cannot create a filesystem of the specified size.
Action/Object
Qualifier
Qualifier Description
Logins
Defaults
Feature Interactions
enable mst
init
inads
none
none