list ip-route
Issue 5 October 2002
289
555-233-119
list ip-route
Use list ip-route to display a list of the IP routes from the Avaya Definity Server
CSI out to the LAN. Enter the board parameter and specify which C-LAN circuit
pack for which to show the IP routes (for example, list ip-route board UUCss).
Output
The following example shows the output from list ip-route.
Field descriptions
Action/Object
Qualifier
Qualifier Description
Logins
Defaults
Feature Interactions
list ip-route
board UUCss
Board Location
Example:
list ip-route board 01A03
init
inads
craft
none
none
Route
Number
IP-route number
Destination
Node
Destination of the route. The destination is administered on the Node
Name screen. Default indicates the default route.
Gateway
The node name of the Gateway through which the destination is to be
reached. The Gateway is administered on the Node Name screen.
C-LAN Port
Indicates the C-LAN port location that provides the interface for the route.
Metric
Specifies the desirability of the IP route in terms of the efficiency of data
transmission over the route. Valid entries are
0
(a simple route) and
1
(a
complex route). A metric value of
1
is used only when the system has
more than one C-LAN board installed. A metric-1 route diverts usage of
the route to a metric - 0 route, if available.
Route Type
A non-administrable field that specifies whether this is a network or host
route. A network route is a route to all nodes on the (sub)network
specified in the
Destination Node
field. A host route is a route to the
single node specified in the
Destination Node
field.
list ip-route
IP ROUTING
Route Destination C-LAN Route Accepted
Number
Node
Gateway Port Metric Type by C-LAN
xxx xxxxxxxxxxxxxxx xxxxxxxxxxxxxxx xxxxx x xxxx xxxxxx
xxx xxxxxxxxxxxxxxx xxxxxxxxxxxxxxx xxxxx x xxxx xxxxxx
xxx xxxxxxxxxxxxxxx xxxxxxxxxxxxxxx xxxxx x xxxx xxxxxx