Maintenance Objects
1352
Issue 5 October 2002
If there is no reply:
a. Check that the internal cables on the TN802 circuit pack (Notes 4
and 6 in
Figure 42 on page 1354
) have not worked loose.
b. Otherwise, replace the circuit pack.
3. At the command prompt, type ping 10.32.64.97 (the internal IP trunk
server address) and press
Enter
.
If configured correctly, the system displays:
Reply from nnn.nn.nn.nn: bytes=32 time <##ms TTL=###
If there is no reply:
a. Check that the internal cables on the TN802 circuit pack (Notes 4
and 6 in
Figure 42 on page 1354
) have not worked loose.
b. Otherwise, replace the circuit pack.
4. At the command prompt, type ping 10.32.64.96 (the IP address of the
internal Motorola MPC860 processor) and press
Enter
.
If configured correctly, the system displays:
Reply from nnn.nn.nn.nn: bytes=32 time <##ms TTL=###
If there is no reply:
a. Check that the internal cables on the TN802 circuit pack (Notes 4
and 6 in
Figure 42 on page 1354
) have not worked loose.
b. Otherwise, replace the circuit pack.
5. Ping the gateway: at the command prompt, type ping XX.XXX.XXX.XXX
(the IP address of the gateway) and press
Enter
.
6. When finished, at the command prompt type exit and press
Enter
.