SYS-PRNT (System Printer)
Issue 5 October 2002
1613
555-233-119
Link Retry Test (#215)
The Link Retry Test sends a message to the SYS-PRNT software process either
(1) to make a data call to the extension to which the SYS-PRNT output device
connects OR (2) to open the EIA port to the SYS-PRNT output device. If the
System Printer Link is already up, this test passes without making a data call or
opening the EIA port.
Table 466.
TEST #215 Link Retry Test
Error
Code
Test
Result
Description/ Recommendation
10, 20
ABORT
Internal system error
1. Retry the command at 1-minute intervals a maximum of 2 times.
30
ABORT
Internal system error
1. Refer to the
‘‘Procedures for Restoring the System Printer Link’’
section
for recommended maintenance strategy.
1010
ABORT
The System Printer Link has been busied out.
1. Enter the release sp-link command to release the System Printer Link
from the busyout state.
2. Reissue the test sp-link long command to execute the test.
FAIL
The System Printer Link CANNOT be established.
1. Refer to the
‘‘Procedures for Restoring the System Printer Link’’
section
for recommended maintenance strategy.
PASS
The System Printer Link is up.
Continued on next page