Maintenance for CSI systems
555-233-119
52
Issue 5 October 2002
Logging On/Off
System Login Procedure
1. At the login prompt, type craft and press
Enter
.
2. In the
password
prompt, type crftpw and press
Enter.
For security reasons, the password is not displayed as it is typed. The
following information appears:
Terminal Type (513, 715, 4410, 4425, VT220): [513]
3. Enter the type of management terminal and press
Enter
.
NOTE:
If you are logging in remotely to the CSI, you may need to disable your local
modem’s error correction before attempting to establish connection with the
switch’s external modem. For most modems, the AT\N0 [“zero”] command
should disable error correction.
Forced Password Aging and Administrable
Logins
This feature provides enhanced login/password security by adding a security
feature that allows users to define their own logins/passwords and to specify a set
of commands for each login. The system allows up to 11 customer logins. Each
login name can be customized and must be made up of from 3 to 6
alphabetic/numeric characters, or a combination of both. A password must be
from 4 to 11 characters in length and contain at least 1 alphabetic and 1 numeric
symbol. Password aging is an optional feature that the super-user administering
the logins can activate.
NOTE:
If several users are logging in and out at the same time, the
Transient
command conflict detected; please try later
message may
appear. After the users finish logging in or out, the terminal is available for
use.