Maintenance Objects
555-233-119
866
Issue 5 October 2002
Memory Card Translation Data Integrity Test
(#694)
This nondestructive test verifies the integrity of the translation file stored in the
memory card. It reads (without any PREC updates) the translation file from the
memory card and performs a checksum error checking. The calculated checksum
value is compared with the recorded checksum value in the translation file. If the
values are different, the translation file is corrupted.
104
FAIL
Directories on the memory card are corrupted and cannot be recovered.
105
FAIL
"0" cannot be written into memory before an erase operation.
106
FAIL
Memory card cannot be erased.
107
FAIL
Data cannot be written onto a memory card after an erasure.
1. Replace the memory card and re-run the test.
110
FAIL
Cannot write to old memory card (pre-g3v9). Card format must be post-g3v8.
1. Replace with proper card.
Table 137.
TEST #694 Memory Card Translation Data Integrity Test
Error
Code
Test
Result
Description/ Recommendation
2012
2106
2114
ABORT
Internal system error
1. Retry the command at 1-minute intervals a maximum of 5 times.
2013
2100
none
ABORT
Could not allocate the necessary system resources to run this test.
1. Retry the command at 1-minute intervals a maximum of 5 times.
2110
ABORT
No memory card is inserted.
1. Insert a formatted memory card into the slot at the Processor circuit
pack.
2. Retry the command at 1-minute intervals a maximum of 5 times.
Continued on next page
Table 136.
TEST #693 Memory Card Erase/Write/Read Test —
Continued
Error
Code
Test
Result
Description/ Recommendation
Continued on next page