Maintenance Objects
1384
Issue 5 October 2002
NT Reset Test (#1381)
This test is destructive.
This test resets the circuit pack. The test is highly destructive and can only be
initiated by a system technician-demanded reset board UUCSS command.
7, 89,
1007
FAIL
Ping to the destination failed through this port due to the destination
down.
1. Verify that at least one destination reachable through this port is
up.
2. Once verified, execute test port UUCSSpp command to verify
that the H.323 Signaling Group Ping Test (#1387) passes.
PASS
Ping through this port successful.
Table 356.
TEST #1381 NT Reset Test
Error
Code
Test
Result
Description/ Recommendation
None
ABORT
System resources required for this test are not available.
1. Retry the reset board UUCSS command at 1-minute intervals a
maximum of 5 times.
1015
ABORT
Port is not out-of-service.
1. Busyout the circuit pack (busyout board UUCSS).
2. Execute the reset board UUCSS command again.
2100
ABORT
System resources required for this test are not available.
1. Retry the reset board UUCSS command at 1-minute intervals a
maximum of 5 times.
1
FAIL
The circuit pack failed to reset.
2
FAIL
The circuit pack failed to restart.
1. Execute the reset board UUCSS command again.
2. If the problem persists, replace the circuit pack.
Continued on next page
Table 355.
TEST #1379 Ping Test —
Continued
Error
Code
Test
Result
Description/ Recommendation
Continued on next page