IPMEDPRO (IP Media Processor Circuit Pack)
Issue 5 October 2002
1265
555-233-119
IPMEDPRO (IP Media Processor
Circuit Pack)
The TN2302 (IPMEDPRO) circuit pack is the next generation H.323 platform. The
TN2302 includes a 10/100 BaseT Ethernet interface to support H.323 endpoints
for Avaya Definity Server CSI IP (Internet Protocol) trunks and H.323 endpoints.
The TN2302 can perform echo cancellation, silence suppression, DTMF
detection, and conferencing. It supports the following codecs, fax detection for
them, and conversion between them:
■
G.711 (mu-law or a-law, 64Kbps)
■
G.723.1 (6.3Kbps or 5.3Kbps audio)
■
G.729A (8Kbps audio)
Use the TN2302 IPMEDPRO circuit board to provide voice over IP connectivity.
The TN2302 can run the Media Processor (MedPro) application, which allows the
TN2302 to act as a service circuit to terminate generic RTP streams used to carry
packetized audio over an IP network. As part of the overall H.323 implementation,
the TN2302 circuit pack handles the audio streams, and the TN799 C-LAN
handles the TCP/IP signaling channels. This maintenance object applies only to a
TN2302 IPMEDPRO running the Media Processor application.
The Media Processor application is built upon the existing ITS software. It is not
administered in Avaya MultiVantage Software as a DS1 trunk, and does not
emulate a DS1 for maintenance purposes. Use the following Maintenance
procedures for this application.
MO Name (in
Alarm Log)
Alarm
Level
Initial Command to
Run
1
1.
UU is the universal cabinet number. C is the carrier designation (A, B, C, D, or E). SS is
the number of the slot in which the circuit pack resides (01 to 21).
Full Name of MO
IPMEDPRO
MAJOR
test board UUCSS sh
IP Media Processor Circuit Pack
IPMEDPRO
MINOR
test board UUCSS l
IP Media Processor Circuit Pack
IPMEDPRO
WARNING
test board UUCSS sh
IP Media Processor Circuit Pack