Maintenance Objects
1536
Issue 5 October 2002
Link Retry Test (#215)
This test sends a message to the CDR software process to make a data call to the
extension where the CDR output device connects to or opens the EIA port to the
CDR output device. If the CDR link is already up, this test is passed without
making any data call or opening the EIA port.
Table 425.
TEST #215 Link Retry Test
Error
Code
Test
Result
Description/ Recommendation
10
ABORT
Internal system error
20
ABORT
Internal system error. Internal error in Maintenance Action Process (MAP). MAP
returns an error back to maintenance script (HMM). Timer expires while waiting
for the reply from MAP.
1. Retry the command at 1-minute intervals a maximum of 5 times.
30
ABORT
Internal system error
1. Refer to
‘‘Procedures for Restoring the CDR Link’’
.
1010
ABORT
The CDR link has been busied out to out-of-service.
1. Enter release cdr-link primary|secondary command to release the CDR
link from busyout state.
2. Retry test cdr-link primary|secondary long command to execute the test.
FAIL
The CDR link CANNOT be established.
1. Refer to the
‘‘Procedures for Restoring the CDR Link’’
for instructions.
PASS
The CDR link is up.
Continued on next page