Maintenance Commands
555-233-119
602
Issue 5 October 2002
NOTE:
The default DiffServ and 802.1p/Q parameters downloaded to a IP Media
Processor board will be used in the execution of ping and traceroute
commands which are sourced from that IP Media Processor. By convention,
the recipient of a ping will reply with the same QoS value found in the
received packet, hence the measurements reported should reflect the
behavior of the type of packets sent. IP Media Processor-sourced pings
should reflect audio transport performance and C-LAN-sourced pings
should reflect control information transport performance.
Output
The following shows an example output for C-LAN traceroute. For Medpro or
Prowler boards, the clan-port (1-17) qualifier does not appear.
Action/
Object
Qualifier
Qualifier Description
Logins
Defaults
Feature
Interactions
traceroute
ip-address
node-name
board
clan-port
where IP address is
www.xxx.yyy.zzz
from node-name form
cabinet-carrier-slot address of the IP
circuit pack
port 1-17
Example:
traceroute ip-address
123.4.56.789
board 1C14
init
inads
craft
customer
Primary
None
source
an endpoint’s virtual port ID
Example:
trace-route ip-address
106.245.27.205 source S00015
traceroute ip-address 135.9.1.22 board 1C14 clan-port (1-17)
TRACE ROUTE RESULTS
Hop
Time(ms)
IP Address
0
from address
135.9.1.22
1
03,10,05
134.9.14.23
2
11,20,03
134.9.5.103
3
22,01,25
106.245.27.205
4
22,01,25 !N
106.245.27.205