Maintenance Commands
555-233-119
490
Issue 5 October 2002
status link n
(csi, si, r models with C-LAN circuit pack - Ethernet connection)
Use status link to displays:
■
static information about the link
■
the data extension and port used, connect speed, and protocol information
■
a counter of CHAP failures for PPP links
■
time information for PPP and Ethernet links (includes the time of the last
reset, the last hour start time, and end time for the error counter statistics).
■
the type and number of active applications
The same information that is displayed by status link can also be invoked with:
■
status pgate-port for PGATE links
■
status clan-port or netstat link n for C-LAN links.
Output
The following example shows page 1 of the output from the status link n (si with
TN794 Net Packet/Packet Interface circuit pack).
Action/Object
Qualifier
Qualifier Description
Logins
Default
Feature Interactions
status link
n
Number of the administered link.
Example:
status link 1
init
inads
craft
none
none
status link 1 Page 1 of 3
LINK/PORT STATUS
Link Number: 1
Link Status: connected
Link Type: ethernet
Link Name: ethernet on link 1
Service Port Location: 01A0917
Service Port Data Extension: 2991
Service State: in-service/idle
Node Name: ber1
Source IP Address: 192.168.10.11
Enabled? yes
Maintenance Busy? no
Active Channels: 0