Maintenance Objects
555-233-119
744
Issue 5 October 2002
ATM-INTF (TN2305/6)
The TN2305/6 is recognized by the system as an ATM Interface board
(ATM-INTF) if it has not been assigned a personality through the add atm-pnc
command or add atm trunk command. ATM-INTF does not have a maintenance
strategy associated with it, although the Control Channel test can be run on
demand by using the test board command, and the board can be reset by using
the reset board command. The board is visible through the list config and
change circuit-pack commands.
The circuit packs listed in
Table 79
are ATM-EI boards if they are administered to
serve the ATM Port Network Connectivity (ATM-PNC).
NOTE:
Always replace an ATM-EI circuit pack with the same type.
MO Name (in Alarm Log)
Alarm Level
Initial Command to Run
Full Name of MO
ATM-INTF
WARNING
test board UUCSSpp
ATM interface board
Table 79.
ATM-EI circuit packs for ATM-PNC
Circuit pack
Fiber
Echo cancellation
Release
TN2305
Multi mode
Y
7.1
TN2306
Single mode
Y
7.1