release port
Issue 5 October 2002
383
555-233-119
Feature Interactions
Specific component maintenance performed on a link sometimes conflicts with
link maintenance, itself (busied out objects create link setup failure). Frequent link
re-setup attempts may delay faulty component recovery. For best results,
technicians should use busyout to disable attempted link re-setup.
Output
The following example shows the output from release pms-link.
Field descriptions
release port
Use release port to deactivate ports on circuit packs.
Output
The following example shows the output from release port 1c0701, assuming
that the port in cabinet 1, carrier c, slot 7, circuit 1 is an analog port.
Port
This field is left blank.
Maintenance Name
PMS-LINK
Alt. Name
Not applicable.
Result
Success status of a busied out object (PASS, ABORT, FAIL)
Error Code
System-generated description of a command failure.
Action/Object
Qualifier
Qualifier Description
Logins
Defaults
Feature Interactions
release port
location
Physical location of the port:
PCSS
init
inads
craft
none
none
release pms-link
COMMAND RESULTS
Port Maintenance Name Alt. Name Result Error Code
PMS-LINK PASS