
ATM-BCH (ATM B-Channel Trunk)
Issue 5 October 2002
735
555-233-119
Table 73. TEST #256 Service State Audit Test
Error
Code
Test
Result
Description/Recommendation
1000
ABORT
Needed resources not available, port on a call or initializing
1. Run status trunk grp#/mbr#.
1. Check the results of Test #255.
1018
ABORT
Maintenance disabled
1. Enable maintenance by entering y in the
Maintenance Tests
field on
page 2 of the change trunk-group form.
1113
ABORT
Signaling link failed
1. Run status trunk grp#/mbr#.
2. Check the results of Test #255.
3. See the
‘‘ATM-SGRP (ATM Signaling Group)’’
maintenance object.
1114
ABORT
Signaling link in transitional state
1. Retry the command up to 5 times at 1-minute intervals.
1116
ABORT
Trunk not in Out-of-Service/Far-end state and country protocol other than 1
1117
ABORT
Service-state audit message outstanding
1. Wait 2 minutes and try again.
2100
ABORT
Could not allocate needed resources
1. Retry the command up to 5 times at 1-minute intervals.
1113
FAIL
Signaling link failed
1. See the
‘‘ATM-SGRP (ATM Signaling Group)’’
and ISDN-LNK (ISDN
Signaling Link Port) maintenance objects.
FAIL
Internal system error
1. Retry the command up to 5 times at 1-minute intervals.
PASS
1. Wait 4 minutes and check the Error Log for any new Error Type 3073.
■
If there are none, both sides of the ISDN connection agree on the
service state. The negotiation succeeded.
■
If there is a new 3073 error, the negotiation failed (the request timed
out).
Continued on next page