Maintenance Objects
1910
Issue 5 October 2002
Port Audit and Update Test (#36)
This test sends port level translation data from switch processor to the UDS1
Interface circuit pack to ensure that the wideband access endpoint port’s
translation is correct.
Table 576.
TEST #36 Audit and Update Test
Error
Code
Test
Result
Description/ Recommendation
ABORT
Internal System Error.
1. Retry the command at 1-minute intervals a maximum of 5 times.
1006
ABORT
The port is out-of-service. If the port is busied out:
1. Issue release access-endpoint <extension> command to put the
port back into in-service.
2. Retry the test command.
If the port is not busied out:
1. Check the error and alarm logs for WAE-PORT and UDS1-BD errors
and alarms. Follow the recommended repair procedures.
2000
ABORT
Response to the test request was not received within the allowable time
period.
2100
ABORT
Could not allocate the necessary system resources to run this test.
1. Retry the command at 1-minute intervals a maximum of 5 times.
FAIL
Internal system error.
1. Retry the command at 1-minute intervals a maximum of 5 times.
PASS
Port translation has been updated successfully.
Continued on next page