Siemens siprotec 7SA6, Manual

Page: 623 / 876

Installation and Commissioning
8-49
7SA6 Manual
C53000-G1176-C156-2
Figure 8-25 Dialog Box: Generate indications
Changing the
Operating State Clicking for the first time onto one of the field in column
Action
you will be asked for
password n° 6 (for hardware test menus). Having entered the correct password single
messages can be issued. To do so, click on
Send
. The corresponding message is is-
sued and can be read out either from the event log of the SIPROTEC
®
4 - device or
from the substation.
As long as the windows is open, further tests can be performed.
Test in Message
Direction For all information that is transmitted to the central station the following is tested in
Status Scheduled:
G Make sure that each checking process is carried out carefully without causing any
danger (see above and refer to DANGER!)
G
Click on
Send
and check whether the transmitted information reaches the central
station and shows the desired reaction.
Test in Command
Direction The information beginning with “>” is transmitted towards the device. This kind of in-
formation must be indicated by the central station. Check whether the reaction is cor-
rect.
f
Exiting the Test
Mode To end the System Interface Test, click on
Close
. The device is briefly out of service
while the start-up routine is executed. The dialogue box closes.