Siemens siprotec 7SA6, Manual

Page: 194 / 876

Functions
6-4
7SA6 Manual
C53000-G1176-C156-2
Exiting the
Setting Mode If an attempt is made to exit setting modification mode using the key or the key,
the message
Are you sure?
will be displayed followed by the responses
Yes, No,
and
Escape
(see Figure 6-4). If the response
Yes
is selected, modification of settings
can be confirmed by pressing the key. To cancel pending modifications to settings
and exit setting modification mode, the response
No
must be selected. Press the
key until the response
No
is highlighted. Press the key to confirm and exit. Incor-
rect entries may be retracted in this manner. To remain in the setting modification
mode, press the
key until the response
Escape
is highlighted. Press the key
to confirm, and the user can remain in setting modification mode without down-loading
modifications.
Figure 6-4 Ending the setting mode using the front control panel
From PC
with
DIGSI
®
4
To select a function, double-click on
Settings
, and then double-click on the desired
setting function (e.g.,
Power System Data 1
is selected by double-clicking
Set-
tings
, and then double-clicking
Power System Data 1
as illustrated in Figure 6-5).
K450.gif
Figure 6-5 Navigating using DIGSI
®
4 — example
A dialogue box associated with the selected function is displayed (e.g., if
Power Sys-
tem Data 1
function is selected, the dialogue box shown in Figure 6-6 will appear).
If a function contains many settings, the dialogue box may include multiple windows.
In this situation, the user can select individual windows via tabs located at the top of
MENU
ENTER
ENTER
ENTER
ENTER
Are you sure?
> Yes No Escape
ENTER ENTER
Settings are ok
> Continue
: